1. Introduction

☆ Low-foam spray anti-rust cleaning agent is mainly composed of low-foam surfactants, penetrants, diffusion agents and high-quality special effects cleaning additives and other compounds of environmentally friendly water-based cleaning agents, does not contain heavy metals and other controlled substances, in the composition There are no harmful substances that need special labeling, green environmental protection, safety, and can be completely biodegradable.

　2. Purpose

☆ Used to clean carbon steel, cast iron and other ferrous metal parts surface oil, grinding oil, cutting fluid, anti-rust oil, dust and other pollutants.

　3. Main performance

☆ low bubble or even no bubble, especially suitable for high pressure spray cleaning, high concentration, oil removal ability, can quickly remove all kinds of oil and stains on the surface of the workpiece.

☆ has a strong penetration, dispersion, solubilization, emulsification.

☆ Less dosage, completely dissolved, long service life, easy to rinse, and can effectively protect the surface of the cleaned material from erosion while cleaning.

☆ Green environmental protection, high efficiency, safety and economy.

　4. Main technical indicators

Product Name/Model Product Name/Model KRB-208 Concentrated Low Foam Cleaning Agent

Appearance (stock solution) Outlook yellowish transparent liquid, no irritating odor

Density Density( g/ cm3) 1.10±0.05

　　PH 值 PH value( original liquid) 10.5～13(5%浓度)

Toxic and harmful inspection Poisonous and harmful check non-toxic, harmless, non-irritating reaction

Biodegradable Biodegradation completely biodegradable

　5. Methods of use

☆ When using this product, you should read the product instructions in detail and use it under the guidance of professionals. The cleaning method can be spray, heat immersion, ultrasonic cleaning, manual wiping, etc.

☆ When in use, the concentration of the cleaning solution should be adjusted according to the severity of the oil stain. In order to obtain the best cleaning effect, the stock solution and water are generally prepared into a cleaning solution with a concentration of 5%. After heating to 45~65 ℃ for spray cleaning or ultrasonic cleaning for 2~6 minutes, rinse with clear water and then dry or dry directly depending on the cleaning requirements of the workpiece. The cleaning capacity can be improved by increasing the concentration of the cleaning solution. Manual wipe cleaning agent concentration is relatively high.

☆ When the oil stain is particularly heavy or high melting point fats are encountered, part of the sludge should be shoveled off manually or mechanically before cleaning.

6. Precautions

☆ Adjust the concentration of the cleaning solution according to the degree of oil pollution, and determine the following workpiece treatment process according to the requirements of the surface cleanliness of the cleaned workpiece.

☆ remove the oil slick on the surface of the tank in time to avoid secondary pollution.

☆ Add 1% ~ 3% of the cleaning agent. If the cleaning ability cannot reach the original level after supplementation, it can be discarded and replaced with new liquid.

Do not make this product contact with the eyes, if accidentally splashed into the eyes, can lift the eyelid, with flowing water or saline rinse; do not swallow this product, if accidentally swallowed, do not induce vomiting, keep the rest state, timely medical care.

To prevent excessive skin degreasing, please wear chemical resistant gloves during operation.

7. Waste water treatment

☆ The waste liquid shall be treated as necessary and discharged after reaching the standard or after neutralization, it shall be incorporated into the urban and regional chemical sewage systems for centralized treatment and then discharged to the standard.

The waste liquid can not be discharged into the natural water system and sewer. Refer to relevant national and local regulations before disposal.

　8. Packaging and storage

☆ Packing: 25kg/plastic barrel; 200kg/plastic barrel.

Storage: sealed in a cool, dry and ventilated place, shelf life of 2 years.