KRB-1 four-in-one phosphating solution
KRB-1 four-in-one phosphating solution is a technical product integrating degreasing, rust removing and phosphating passivation on the surface of steel. This product can be used for machinery, electrical switch cabinet, stationery, instrumentation, cabinets and other industries in the steel products before coating surface treatment of special cleaning agent.
hiddenValue
Details Introduction
KRB-1 four-in-one phosphating solution is a technical product integrating degreasing, rust removing and phosphating passivation on the surface of steel. This product can be used for machinery, electrical switch cabinet, stationery, instrumentation, cabinets and other industries in the steel products before coating surface treatment of special cleaning agent.
1. product characteristics:
|
Appearance |
Colorless transparent or yellowish liquid |
Flammability |
non-combustible, non-explosive |
|
Smell |
No pungent odor |
PH value |
1--2 |
|
Density (25 ℃) |
1.18±0.02 |
water soluble |
100% soluble in water |
2.Product features:
1. This product can simultaneously remove oil, rust and oxide skin on the surface of steel, and can produce a layer of phosphating and passivation film with strong corrosion resistance. Its phosphating crystallization is dense and firm, and it has strong adhesion to the surface coating layer of steel products.
2. The workpiece treated by this product, under the condition of not being splashed with water, its corrosion resistance and rust prevention period can reach 30 to 60 days, which can meet the demand of coating production cycle.
3. This product can be continuously added and adjusted during use, without emission, saving labor, time and material (50 ~ 60m ²/Kg)
3. method of use:
1. This product can be soaked, ultrasonic and manual scrubbing.
2. When the surface of the workpiece is stuck with oil, dirt and light rust, it can be treated at room temperature (25~35 ℃) for 8~10min. If the surface is stuck with light oil and iron oxide, it can be treated at 40~50 ℃ for 15~20min, and it can be coated after self-drying or blow-drying.
4. technologist recommended:
1. This product is concentrated, such as soaking use, should be 1: 1~2 mixed with water, after use. (It is recommended that the ratio of 1:1-1.5 is better than Z.) Such as manual scrubbing, it is used directly, without water.
2. The surface of the workpiece treated by this product can not be splashed with rain water, do not stack, avoid damage to the phosphating film, and can be coated after hard work.
3. If the surface of the workpiece is oily, it is recommended to remove the oil, rinse clean, and then use this product to deal
4. For cold-rolled steel soaking Z-best process: degreasing-washing-KRB-1 four-in-one treatment-dry spraying
5. product packaging:
30Kg/barrel
Key words:
Industrial cleaning agent
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!
Related Products
Contact Us
Telephone:027-87518299
Fax: 027-87518299
Mobile:13507185876
Mobile:18971607400
Mailbox:xiongxx@126.com
Website:www.krb888.com
www.krbkj.com
Address: Room 910, Block A, Guanggu International Building, Jiayuan Road, Donghu New Technology Development Zone, Wuhan City
Social Media
All rights reserved©Wuhan Keribo Technology Co., Ltd.SEO Business License
Website Construction: www.300.cn This site already supports IPV6